GD32 Embedded AI

1.2.0.39432

2026-05-08

Introduction：Support H5、TFLite、Onnx and Savemodel model format.
Support model analysis, extracts weights and model network information based on the input model.
Support automatic generation of the Keil and IAR project, and generates a project that can be compiled and run.
Support for post-training model quantization and support for importing NPZ datasets.
Support for forward inference of single or multi-branch network.
Support automatic benchmarking, and generate model analysis reports.

GD32 ISP Console(Linux)

5.1.0.39154

none

2026-04-27

Introduction：ISP console tool under Windows system, used for serial port and USB burning GD MCU Flash data.

GD32_ISP_Console(Windows)

5.1.0.39034

none

2026-04-23

Introduction：ISP console tool under Windows system, used for serial port and USB burning GD MCU Flash data.

GD-Link Utility Programmer

2.1.10.38023

none

2026-03-24

Introduction：GD-Link Utility Programmer is a software tool for programming GD32 series MCU chips. Using this tool with GD-Link, users can perform operations such as chip erase, Flash read/write, and option byte configuration on GD32 microcontrollers. The tool also supports GD-Link offline download and firmware update functions.

GD32 Embedded Builder

1.5.8_Rel_r37696

none

2026-03-16

Introduction：Embedded Builder is a C-language integrated development environment (IDE) of GD32MCU. User can configure peripherals graphically, the IDE can generate code, compile project and debug.

GD32 All-In-One Programmer

5.0.6.37166

none

2026-02-06

Introduction：GD32 All-In-One Programmer is a software tool for programming GD32 series MCU chips. The software supports firmware download, chip erasure, read and write Flash, setting option bytes and other operations on GD32 microcontrollers through a variety of interfaces (such as serial port, USB, GD ISP Bridge, etc.) and protocols (such as UART, I2C, OSPI, DFU, HID, CAN, LIN, etc.). It is suitable for development, testing and mass production scenarios.

GD Custom_HID Tool

2.0.3.18059

none

2025-02-26

Introduction：The software based on the Custom HID protocol is used in conjunction with the GD's Custom HID device, serving as demo application software.

GD PMU Monitor

1.8.1.14810

none

2022-11-23

Introduction：Connect with the development board through the USB Adapter, and directly configure the PMU register value and status in a visual way, instead of MCU programming operation, simplify the development process and reduce the development difficulty.