Tool & Software (16 in all)
Introduction：Embedded Builder is a C-language integrated development environment (IDE) of GD32MCU. User can configure peripherals graphically, the IDE can generate code, compile project and debug.
Introduction：GD-Link programmer is a tool to program GD series MCU, With GD-Link programmer, user can download the application program to MCU’s internal flash memory, set read and write protection, etc. And the programmer also supports GD-Link offline download function.
Introduction：There are 3 files in the zip file, they are used to support the development of GD32F10x applications in Keil and IAR ,details are as follows:
1. GigaDevice.GD32F10x_Addon.2.1.0.exe, addon files used to support keil ver 4 .7x
2. GigaDevice.GD32F10x_DFP.2.3.0.pack, pack files used to support keil ver 5.27 or later
3. IAR_GD32F10x_ADDON.2.1.0.exe, addon files used to support IAR ver 7.4 or later
Introduction：Include three installer files as below:
1. GigaDevice.GD32F1x0_DFP.3.4.0.exe support Keil Version 4.7x and above;
2. GigaDevice.GD32F1x0_DFP.3.4.0.pack support Keil Version 5.27 and above;
3. IAR_GD32F1x0_ADDON.3.4.0.exe support IAR Version 7.4 and above.
Introduction：GD32F10x standard firmware library is suitable for GD32F10x series MCU. The library is compatible with the CMSIS (Cortex-M Microcontroller Software Interface Standard), and includes programs, data structures and macro definitions. It covers the features of all the integrated peripherals, contains all the related drivers and sample programs.
Introduction：series MCU. The library is compatible with the CMSIS (Cortex-M Microcontroller Software Interface Standard), and includes programs, data structures and macro definitions. It covers the features of all the integrated peripherals, contains all the related drivers and sample programs.
Introduction：ISP console tool under Windows system, used for serial port and USB burning GD MCU Flash data.
Introduction：This programming software based on the bootloader in the chip, the communication interface supports UART and USB, and supports the basic operations of programming / erasing / reading MCU flash and ob.
Introduction：This programming software based on the bootloader in the chip for Linux system, the communication interface supports UART, and supports the basic operations of programming / erasing / reading MCU flash and ob.
Introduction：GD32 MCU Information Query Tool. Filter and match MCU according to the options, thereby improving the efficiency of selection and making the selection process more convenient and friendly.
Introduction：The drivers for the GD32 Dfu device
Introduction：USB IAP (In Application Program) tool. User can operate the flash memory of the MCU by the IAP code in the memory of the MCU.
Introduction：GD32F1x0 scatterloading routine is suitable for GD32F1x0 series MCU.
The routine are used for demonstration that how to allocate code to special area.
Refer to this routine, customers could allocate their non critical codes to high address space of flash.
The routine have been validated with Keil v4.7x, Keil v5.18a and IAR v7.4
Introduction：USB Virtual Com Port Driver.
Introduction：Pdsc Installation of support files for Keil MDK 5.13 or later version
Introduction：Serial port programmer from third party partners.
@2024 ALL RIGHTS RESERVED
