Tool & Software (8 in all)
Introduction：GD-Link Utility Programmer is a software tool for programming GD32 series MCU chips. Using this tool with GD-Link, users can perform operations such as chip erase, Flash read/write, and option byte configuration on GD32 microcontrollers. The tool also supports GD-Link offline download and firmware update functions.
Introduction：Embedded Builder is a C-language integrated development environment (IDE) of GD32MCU. User can configure peripherals graphically, the IDE can generate code, compile project and debug.
Introduction：ISP console tool under Windows system, used for serial port and USB burning GD MCU Flash data.
Introduction：GD32 All-In-One Programmer is a software tool for programming GD32 series MCU chips. The software supports firmware download, chip erasure, read and write Flash, setting option bytes and other operations on GD32 microcontrollers through a variety of interfaces (such as serial port, USB, GD ISP Bridge, etc.) and protocols (such as UART, I2C, OSPI, DFU, HID, CAN, LIN, etc.). It is suitable for development, testing and mass production scenarios.
Introduction：GD32C2x1 standard firmware library is suitable for GD32C231 series MCU. The library is compatible with the CMSIS (Cortex-M23 Microcontroller Software Interface Standard), and includes programs, data structures and macro definitions. It covers the features of all the integrated peripherals, contains all the related drivers and sample programs.
Introduction：Include two installer files as below:
1. GigaDevice.GD32C2x1_DFP.1.0.0.pack support Keil Version 5.27 and above;
2. IAR_GD32C2x1_ADDON.1.0.0.exe support IAR Version 8.32 and above
Introduction：The software based on the Custom HID protocol is used in conjunction with the GD's Custom HID device, serving as demo application software.
Introduction：ISP console tool under Linux system, used for serial port and USB burning GD MCU Flash data.
@2025 ALL RIGHTS RESERVED
