Tool & Software (16 in all)
Introduction：GD-Link programmer is a tool to program GD series MCU, With GD-Link programmer, user can download the application program to MCU’s internal flash memory, set read and write protection, etc. And the programmer also supports GD-Link offline download function.
Introduction：GD32 All-In-One Programmer is a software tool for programming GD32 series MCU chips. The software supports firmware download, chip erasure, read and write Flash, setting option bytes and other operations on GD32 microcontrollers through a variety of interfaces (such as serial port, USB, GD ISP Bridge, etc.) and protocols (such as UART, I2C, OSPI, DFU, HID, CAN, LIN, etc.). It is suitable for development, testing and mass production scenarios.
Introduction：Embedded Builder is a C-language integrated development environment (IDE) of GD32MCU. User can configure peripherals graphically, the IDE can generate code, compile project and debug.
Introduction：The software based on the Custom HID protocol is used in conjunction with the GD's Custom HID device, serving as demo application software.
Introduction：Contains the following files, details are as follows:
(For GD32E103xx)
1. GigaDevice.GD32E10x_DFP.1.3.0.exe, pack file used to support Keil ver 4.7x
2. GigaDevice.GD32E10x_DFP.1.5.0.pack, pack file used to support Keil ver 5.27 or later
3. IAR_GD32E10x_ADDON.1.3.0.exe, addon file used to support IAR ver 7.4 or later
Introduction：Contains the following files, details are as follows:
(For GD32E113xx)
1. GigaDevice.GD32E11x_DFP.1.1.0.exe, pack file used to support Keil ver 4.7x
2. GigaDevice.GD32E11x_DFP.1.3.0.pack, pack file used to support Keil ver 5.27 or later
3. IAR_GD32E11x_ADDON.1.1.0.exe, addon file used to support IAR ver 7.4 or later
Introduction：GD32E10x standard firmware library is suitable for GD32E10x series MCU(GD32E103xxU6/GD32E103xxT6). The library is compatible with the CMSIS (Cortex-M Microcontroller Software Interface Standard), and includes programs, data structures and macro definitions. It covers the features of all the integrated peripherals, contains all the related drivers and sample programs.
Introduction：GD32E11x standard firmware library is suitable for GD32E11x series MCU(GD32E113xxU6/GD32E113xxT6). The library is compatible with the CMSIS (Cortex-M Microcontroller Software Interface Standard), and includes programs, data structures and macro definitions. It covers the features of all the integrated peripherals, contains all the related drivers and sample programs.
Introduction：ISP console tool under Linux system, used for serial port and USB burning GD MCU Flash data.
Introduction：ISP console tool under Windows system, used for serial port and USB burning GD MCU Flash data.
Introduction：GD32 MCU Information Query Tool. Filter and match MCU according to the options, thereby improving the efficiency of selection and making the selection process more convenient and friendly.
Introduction：Include three installer files as below:
1. GigaDevice.GD32E10x_DFP.1.2.0.exe support Keil Version 4.7x and above;
2. GigaDevice.GD32E10x_DFP.1.2.0.pack support Keil Version 5.27 and above;
3. IAR_GD32E10x_ADDON_1.2.0.exe
Introduction：The drivers for the GD32 Dfu device
Introduction：USB IAP (In Application Program) tool. User can operate the flash memory of the MCU by the IAP code in the memory of the MCU.
Introduction：USB Virtual Com Port Driver.
Introduction：Serial port programmer from third party partners.
@2025 ALL RIGHTS RESERVED
