Tool & Software (50 in all)
Introduction：GD32E50x Series MCU standard firmware library of GD32E503/GD32E505/GD32E507/GD32EPRT
Introduction：GD32VF103 standard firmware library includes programs, data structures and macro definitions. It covers the features of all the integrated peripherals, contains all the related drivers and sample program.
Introduction：The drivers for the GD32 Dfu device
Introduction：Include three installer files as below:
1. GigaDevice.GD32E10x _Addon.1.0.1.exe support Keil Version 4.7x ;
2. GigaDevice.GD32E10x _DFP.1.0.2.pack support Keil Version 5.14 above;
3. IAR_GD32E10x _ADDON. 1.0.1.exe support IAR Version 7.4 above.
Introduction：GD32VF103 Firmware Library User Guide.
Introduction：Huawei IoT Studio Integrated Development Environment supports the GD32VF103xx RISC-V MCU series. Huawei IoT Studio IDE includes riscv-none-embed-gcc too-chain and OpenOCD programming and debugging tool.
Introduction：Nuclei Studio IDE supports GD32VF103xx RISC-V MCU series.
Introduction：Huawei IoT Studio IDE explanation folder shows how to use Huawei IoT Studio and GD32VF103xx RISC-V MCU series.
Introduction：MCU ISP programmer is a serial port programmer tool with user interface for using MCUs easily. It is used to program the flash or configure GD MCU with USART peripheral. With ISP programmer, user can download the application program to the internal flash memory, and set read and write protection and so on.
Introduction：USB IAP (In Application Program) tool. User can operate the flash memory of the MCU by the IAP code in the memory of the MCU.
Introduction：GD32F3x0 scatter loading routine.
Introduction：GD32F3x0 series MCU addon files for IDE of IAR7.4, Keil MDK 4.74, Keil MDK 5.26 and higher verison.
Introduction：GD32F20x series MCU addon files for IDE of IAR7.4, Keil MDK 4.74, Keil MDK 5.25 and higher verison.
Introduction：GD32F10x series MCU addon files for IDE of IAR7.4, Keil MDK 4.74, Keil MDK 5.15 and higher verison.
Introduction：GD32F1x0 standard firmware library is suitable for GD32F1x0 series MCU, includes GD32F130 / GD32F150 / GD32F170 / GD32F190.
The library is compatible with the CMSIS (Cortex-M Microcontroller Software Interface Standard), and includes the features of all the integrated peripherals, ex. RCU, FMC and USBD etc. The library provides all the related drivers and generic routine programs, USB device driver and routines are for GD32F150 series only, Which have been validated with Keil v4.7x, Keil v5.18a and IAR v7.4
Introduction：GD32F1x0 scatterloading routine is suitable for GD32F1x0 series MCU.
The routine are used for demonstration that how to allocate code to special area.
Refer to this routine, customers could allocate their non critical codes to high address space of flash.
The routine have been validated with Keil v4.7x, Keil v5.18a and IAR v7.4
Introduction：There are 3 files in the zip file, they are used to support the development of GD32F1x0 applications in Keil and IAR ,
details are as follows:
1. GigaDevice.GD32F1x0_Addon.3.1.0.exe, addon files used to support keil ver 4 .7x,
2. GigaDevice.GD32F1x0_DFP.3.1.0.pack, addon files used to support keil ver 5,15 or later
3. IAR_GD32F1x0_ADDON.1.0.2.exe, addon files used to support IAR ver 7.4 or later
Introduction：The hardware platform of AliOS Things demo is GD32F450Z-EVAL board and WIFI module. The demo code which is based on AliOS Things code, realize the function of communication between WIFI module and Alibaba cloud platform with GD32F450Z-EVAL board. It is suitable for GD32F405/407/450 series MCU, includes all code and user manual .
Introduction：Multi-port download tool is used for multi-port download through ISP during the mass production stage to increase productivity.
Introduction：USB Virtual Com Port Driver.
Introduction：Pdsc Installation of support files for Keil MDK 5.13 or later version
Introduction：Serial port programmer from third party partners.