Datasheet (1 in all)
Application Note (12 in all)
Introduction：GD32 MCU Selection Guide, for all GD32 products.
Introduction：User Manual of GD32VF103xx series RISC-V MCU.
Introduction：GD32VF103 Firmware Library User Guide.
Introduction：Nuclei Studio IDE usage explanation folder shows how to use Nuclei Studio and GD32VF103xx RISC-V MCU series.
Introduction：GD32 USBFS/USBHS Firmware Library User Guide. Introduce the interface principle and firmware structure of USBFS/USBHS for GD32 MCU, show the USB host and device demo implementation.
Introduction：User manual of GD-LinkAdapter.GD-Link adapter is a three-in-one multi-function development tool for GD32 series of MCUs. It provides CMSIS-DAP debugger port with JTAG/SWD interface. User can use GD-Li
Introduction：Application note of programming flash memory.
Introduction：Application note to explain the silicon limitations of GD32F1 series device know at the release date of the document.
Introduction：Application note to introduce the use-method of GD32F150xx TSI (Touch Sensor Interface) module.
Introduction：Application note of GD32F10xxx ADC.
Introduction：Application note to explain how to migrate the software from different MCU platform to GD32F103xx.
Tool & Sofware (15 in all)
Introduction：This programming software based on the bootloader in the chip, the communication interface supports UART and USB, and supports the basic operations of programming / erasing / reading MCU flash and ob
Introduction：The drivers for the GD32 Dfu device
Introduction：GD32VF103 standard firmware library includes programs, data structures and macro definitions. It covers the features of all the integrated peripherals, contains all the related drivers and sample prog
Introduction：Huawei IoT Studio Integrated Development Environment supports the GD32VF103xx RISC-V MCU series. Huawei IoT Studio IDE includes riscv-none-embed-gcc too-chain and OpenOCD programming and debugging too
Introduction：Nuclei Studio IDE supports GD32VF103xx RISC-V MCU series.
Introduction：Huawei IoT Studio IDE explanation folder shows how to use Huawei IoT Studio and GD32VF103xx RISC-V MCU series.
Introduction：MCU ISP programmer is a serial port programmer tool with user interface for using MCUs easily. It is used to program the flash or configure GD MCU with USART peripheral. With ISP programmer, user can
Introduction：GD-Link programmer is a tool to program GD series MCU . With GD-Link programmer, user can download the application program to MCU’s internal flash memory, set read and write protection, etc. And the p
Introduction：USB IAP (In Application Program) tool. User can operate the flash memory of the MCU by the IAP code in the memory of the MCU.
Introduction：Multi-port download tool is used for multi-port download through ISP during the mass production stage to increase productivity.
Introduction：USB Virtual Com Port Driver.
Introduction：Serial port programmer from third party partners.
Evaluation Board (1 in all)
Other Document (4 in all)
Introduction：GigaDevice GD32V RISC-V MCU E-book
Introduction：Presentation on ECCN online Seminar about GD MCU in April, 2014.
Introduction：Presentation of ARM Embedded Application Seminar in 2013.
Introduction：It shows user a simple generalization of GD MCU, includes application fields, development kits, product characteristics and so on.